Xypex Megamix I

XYPEX MEGAMIX I is a thin parge coat for the waterproofing and resurfacing of vertical or masonry or concrete surfaces, as a cap coat for Xypex Concentrate, or as an architectural rendering. Megamix I is a unique blend of Portland cement, treated silica sand, fibres and proprietary chemicals. It is mixed with Xycrylic Admix to produce enhanced bond. Megamix I is applied by brush, trowel or spray up to a thickness of 10 mm. The high performance characteristic of Megamix I are enhanced by Xypex’s unique crystalline waterproofing and protection technology.

NOTE: For patching or resurfacing deteriorated concrete, requiring a thicker application (between 10 mm to 50 mm) refer to the product data sheet for Xypex Megamix II. Recommended for:

• Waterproof coating for vertical concrete block surfaces and cast-in-place concrete walls
• A secondary or cap coat for Xypex Concentrate applications to porous masonry surfaces
• Lining for swimming pools, tunnels and tanks

Advantages

• Excellent adhesion and bond to concrete substrates
• Easy to apply
• Fibre reinforced
• Reduces surface absorption
• Provides good surface for painting or as a final finished surface
• Used as a cap-coat over Xypex Concentrate for rapid return to service applications
• Approved for use with potable water

Packaging

Megamix I is packaged in 20 kg buckets.

Storage

Xypex products must be stored dry at a minimum temperature of 7°C. Shelf life is one year.

Coverage

Required coating thickness will vary depending on project requirements. At the recommended thickness of 3.2 mm, one 20 kg bucket of Megamix I will cover 3.2 m2 Megamix I may be applied as thin as 1.6 mm provided it is used as a cap coat over a coat of Xypex Concentrate.

For application thickness exceeding 10 mm, consult with the Technical Department of Xypex Australia or your local Xypex representative.