Surface Cure R
Hydrocarbon Resin based curing compound conforming to AS 3799 and Hot Pour Asphalt suitable.
Item Code
See Availability Tab
Pack
20L, 205L, 1000L
Hydrocarbon Resin based curing compound conforming to AS 3799 and Hot Pour Asphalt suitable.
SURFACE CURE R is a liquid applied curing compound which consists of a processed blend of petroleum and resin based hydrocarbons.
When applied at the recommended application rate Surface Cure R minimizes moisture loss in freshly laid concrete thus improving the curing of the concrete providing increased strength and durability and improved resistance to surface dusting
Mainly used on freshly laid concrete floors, carparks, hardstand areas, warehouses, bridge ramparts etc. Also used for curing vertical concrete areas immediately after the stripping of forms to assist strength development, improve chemical resistance, etc.
The coating should be applied (undiluted) in a single coat at the specified rate of 5m/L ( 0.2L/m2) to achieve a total dry film thickness to achieve the correct curing properties.
SURFACE CURE R must be applied on to the substrate at the coverage rates recommended as a minimum specification. If specified at higher rates, then allowance for removal of resulting film must be made allowed for before additional works
| Code | Item | Pack |
|---|---|---|
| 18252 | Surface Cure R 20L | 20L |
| 18254 | Surface Cure R 200L | 200L |
| 19483 | Surface Cure R 1000L | 1000L |
SURFACE CURE R should be evenly sprayed (undiluted) over the freshly laid concrete as soon as possible after final trowelling. Ideally SURFACE CURE R should be applied as soon as the surface bleed water has evaporated.
