Product Description
Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions thereby providing an adhesive mortar ideally suited to site application. It is available in three grades: rapid, normal and long pot life for low, medium and high ambient temperatures respectively.
Uses
As a structural adhesive for:
- Concrete elements
- Hard natural stone
- Ceramics, fibre cement
- Mortar, Bricks, Blocks, Masonry etc.
- Steel, Iron, Aluminium
- Wood
- Polyester, Epoxy
- Glass
As a fast setting repair mortar for:
- Corners and edges
- Hole and void filling
- Joint arrises
Joint filling and crack sealing:
- Rigid joint filling
- Crack filling and sealing (non moving)
Characteristics / Advantages
Sikadur®-31 has the following advantages:
- Easy to mix and apply
- Suitable for dry and damp concrete surfaces
- Very good adhesion to most construction materials
- High strength adhesive
- Thixotropic: non-sag and suitable for vertical and overhead application
- Solvent free
- Hardens without shrinkage
- Different coloured components (for mixing control)
- No primer needed
- High initial and ultimate strengths
- Good abrasion resistance
- Adhesive and filler in one
- Impermeable to liquids and water vapour
- Good chemical resistance
Tech Data Sheet
Tech Data Sheet
Safety Data Sheet
Safety Data Sheet