Dymaxion - AGCDM80 Core Drilling Machine
AGCDM80 intended for hand held up to 100mm dia in brick and small diameter concrete core drilling
Model
AGCDM80
AGCDM80 intended for hand held up to 100mm dia in brick and small diameter concrete core drilling
AGCDM80 This core drill machine is unique as it provides a light weight 3.8KG hand held core drill machine but still fitted with the benefits of heavier machines including the most important water swivel when drilling concrete. This means it can be operated in confined spaces where sometimes it is difficult to take larger rig mounted machines or when working on scaffolding or lifting equipment.
The machine spindle is threaded 1/2” BSP with a wide range of 1/2” BSP diamond core drill bits available from 12mm -127mm diameter. When hand held the machine is ideal for many Tradesman tasks needing smaller diameter cores such as pass throug’s for Electrical & Plumbing, chemical and bolt anchor fixing, balustrading (swimming pools and glass fencing)
The machine is also very suitable for everyday brick coring and extension rods are also available. Dymaxion core drill kit products are also ideally suited to operating on this machine.
| Code: | AGCDM80 | ||
| Power Watts | 1700W | Collar Diameter | 43mm |
| Voltage | 220/240V/ | Variable Speeds | Yes |
| 50 - 60Hz | |||
| No Load Speeds RPM | 500-1000 700 - 2300 | Soft Start | Yes |
| Max Drilling Diameter Concrete on Rig | 80 mm | Overload Protection | Yes |
| Max Drill Diameter Brick by Hand | 100 mm | Feedback Electronic Speed Control | Yes |
| Spindle Fitting | ½” BSP | Clutch | Mechanical |
| Rig Mounted or Hand Held | Both | R.C.D. | Yes |
| Rig is Optional Accessory | AGDMRIG | Net Weight | 3.8 KG |
| Optional Dust Vacuum collar. | AGVACCOL80 | ||
| Water Swivel Collar | AGWSC80 |
