Dymaxion - AGCDM250 Core Drilling Machine

This machine with a powerful 2200W motor and contemporary gear ratio engineering enables it to drill up to 250mm in reinforced concrete and weighs 25.3KG. Fitted with electronic overload protection, three drilling speeds, built in bubble levels, water swivel, R.C.D. protection and is supplied ready attached to the rig (see page 27 for information on AGDMRIG).

Concrete core drilling requires a great deal of torque force particularly when drilling through steel reinforcing rods, additionally floors 300mm thick are not uncommon so these are all practical reasons to consider this machine favorably with its adequate power of 2200 watts.

It is supplied and only operated on the core drill rig as illustrated. This rig has many benefits and offers stability with minimum vibration, the rig can also angle down to 45˚.