Masterflow 700

Description

MasterFlow 700 is a ready-to-use pumpable, natural aggregate, general purpose grout which undergoes controlled expansion in the plastic state. MasterFlow 700 is a Class A grout as defined by AS 1478.1-2000, Appendix E, section E5.1. MasterFlow 700 may be placed in dry (damp) packed, plastic or fluid consistency and is generally used in applications requiring a grout thickness between 10mm and 100mm.

Recommended Uses

All general purpose grouting operations with clearances of 10mm to 100mm including:

• Non-critical column and equipment bases.
• An in-fill grout for cavity block walls.
• In Caulking of joints and pipes.
• Between and under pre-cast panels and other joints where total load bearing is not required
• Underpinning where a grout similar in appearance to concrete is required.

Features And Benefits

• Ready to use - premixed grout requires only the addition of mixing water on site.
• Low water/cement ratio - reduces drying shrinkage and increases durability.
• Damp packable - can be applied without slumping.
• Complete void filling - resulting from controlled fluid-phase expansion.
• Non staining grout - similar in appearance to plain concrete.
• Economical - relatively low in-place cost due to its ease of use and flowable properties.
• No added chlorides – does not contribute to chloride load.