Emer-Proof Vapour Control is a grey, two-component, matt to semi-gloss epoxy coating.
When applied at a total dry film thickness of 200 microns it will provide a tenaciously bonded coating controlling the transmission of liquid moisture. It can also be used as a primer for Emer-Proof waterproofing membranes.
Typical Applications
- As a moisture barrier coating to restrict the passage of dampness through concrete and masonry substrates.
- Uses include interior faces of walls, floors, basements, tunnels, cellars, retaining walls, lift wells and underground car parks.
Advantages
- Solvent Free.
- Very Low VOC Emission.
- Anti-microbial Formulation.
- Very Low Odour.
- Compatible with damp substrates.
- Compatible bonding of most subsequently applied coatings, bonding agents, and water-based adhesives.
- Water-based with no odour or volatile emissions.
- Easy clean-up using water.
- Excellent adhesion to a variety of substrates including, concrete, brick, masonry, block, compressed fibre board, stone and timber.
- Readily sanded if required
- Coverage: 5 m²/litre
- Drying times: Re-coat 3-4 hours
- Pot life: 2 hours
- Colour: Grey
- Supply: 20 litre 2 part kit
- VOC content: <5 g/litre
Tech Data Sheet
Tech Datasheet
Safety Data Sheet
Safety Datasheet - Part A
Safety Data Sheet
Safety Datasheet - Part B