COEM Cast-in plates are used to tie/ fix concrete panels to each other. They are used in panels, slabs and civil concrete products. Also to fix uprights and roofing beams to the concrete panels/slabs. In certain projects (where applicable) cast-in plate are used in conjunction with panel clips and frames (I beams). This can eliminate the majority of panel braces required. This saves rigging time and brace hire.
The majority of cast-in plates are sourced from local steel fabricators. Generally these are not ordered early enough. As a result extensive delays are common. COEM manufacture and stock the most common cast-in plates. This ensures rapid order fulfillment. COEM cast-in plates are mass produced. Hence tighter quality control, adherence to industry standards and are more economical.
| Length | Width | Plate | Height | Type | Studs | Black | HDG |
|---|---|---|---|---|---|---|---|
| 200 mm | 200 mm | 12 mm | 85 mm | Type 2 | 2 x 2 | ||
| 200 mm | 200 mm | 12 mm | 85 mm | Type 1 | 2 x 2 | ||
| 200 mm | 200 mm | 12 mm | 120 mm | Type 2 | 2 x 2 | ||
| 200 mm | 200 mm | 12 mm | 120 mm | Type 1 | 2 x 2 | ||
| 300 mm | 200 mm | 16 mm | 120 mm | Type 2 | 3 x 2 | ||
| 400 mm | 200 mm | 16 mm | 120 mm | Type 2 | 4 x 2 | ||
| 500 mm | 200 mm | 16 mm | 120 mm | Type 2 | 5 x 2 |
Type 1: With Ferrule, Type 2: Without Ferrule
